How to Get Rockspace Extender Working After Power Outage?

Is your Rockspace range extender not working after a power outage? Are you facing this issue despite doing Rockspace WiFi extender setup properly? Yes? Then allow us to assist you in resolving the problem.

It is impossible to foresee when the electricity will go out. Problems abound for the public as a result of the power outages. Everything that requires electricity to function will supposedly stop functioning if there is a blackout in your region. Unfortunately, this also interferes with our WiFi and causes it to go dead at times.

Considering you’re having the same problem, read on. We’ve compiled several solutions to assist you. What follows is more reading.

[Fix] Rockspace Extender Not Working After Power Outage

To fix the issue at hand, you must reset the Rockspace extender. Returning the extender to its default factory settings will have it functioning as if you had just purchased it. Along with this, reconfiguring your extender using re.rockspace.local is required before client devices may access the internet.

In this section, we’ll explain how to do both of the things. Here is how to reset Rockspace WiFi extender in a hassle-free manner. Ok, so let’s begin.

How to Factory Reset Rockspace Range Extender?

Here is how you can restore your Rockspace wireless range device:

  • Verify that the Rockspace extender is connected to a source of electricity.
  • It’s time to locate the Reset button on your WiFi booster.
  • Obtain an object similar to a pin.
  • Utilize it to press and then let go of the Reset button.

Finally, that’s all there is to it! When you follow the instructions above, your WiFi range extender will be reset to its default factory settings.

How to Perform Rockspace Extender Setup?

  • Ensure your extender is receiving enough power by plugging it into a wall socket.
  • After that is finished, you may connect your extender to your router via an Ethernet.
  • You should now open a web browser on your machine.
  • To set up your Rockspace range extender, you may use any modern web browser, but it’s important to make sure it’s up to date first.
  • When your browser is ready, go to re.rockspace.local.
  • Just press Enter once you’ve typed in the address.
  • After you’ve completed the above steps, a login window on your device will appear.
  • To proceed, please provide the default credentials for your Rockspace extender.
  • In order to access the Rockspace extender setup process, click Log In.
  • Here you may adjust your extender’s settings to better suit your specific situation.
  • You have successfully finished the Rockspace extender reconfiguration procedure.

For your information, make sure you’re always using the most recent version of the Rockspace extender’s firmware for optimal performance. It will prevent a number of potential problems with your Rockspace extender and will aid in bug fixes if you do this. As with any electronic device, updating your Rockspace range extender to the most recent version may unlock a slew of new features and capabilities. The Rockspace extender’s firmware should be updated anytime you feel like it.

If you want to be sure about the steps to update the firmware of your device, then it is recommended that you refer to the steps given in the Rockspace WiFi extender manual. Trust us, there is no such thing that you will not find there.

Conclusion

If your Rockspace range extender is acting out after a power loss, we hope this article may shed some light on what you can do to get it back up and running. If you liked reading this article, kindly share your feedback with your fellow readers. They will surely find it helpful.

Leave a Reply

Your email address will not be published. Required fields are marked *