Getting Netgear router flashing blue error? No worries! It’s not a major issue to worry about. A Netgear router that flashes blue signifies that it’s starting up. Wait an hour or so until the LED is steady.
If your Netgear router has been flashing a blue light longer than you expected, it indicates that there’s something wrong. You need to find a solution to the problem as quickly as you can.
Are you unsure of how to fix Netgear router’s blue light flashing problem? Wonder no more! This troubleshooting guide will offer you with the top solutions to solve the “Netgear router blinking blue light” problem in a flash. Let’s get started!
How to fix Netgear Router Flashing Blue
Select Best Placement for Netgear Router
Be aware that If you have your Netgear router is located beneath a table or inside a cabinets, near walls or corners it is possible that you will experience “Netgear router blinking in blue” the light issue.
So, to resolve the issue fast ensure that the Netgear router is located in an open , un-congested space.
If you notice a an unchanging green LED in the Netgear router, go to your www.routerlogin.net setup page , and then configure the router (if not already configured) using the instructions for configuration on the screen.
Configure Your Router Properly
A poor configuration of your router from Netgear could cause you to encounter the problem. Don’t worry! The issue will be resolved soon. Make sure to configure it in the correct way.
What? You aren’t sure if you’ve properly configured your Netgear router or not? No worries! First, reset your Netgear router and then plunge to set it up.
Outdated Netgear Router Firmware
The firmware version that is outdated on your device could cause “Netgear Router flashing blue” problem.
So, what do you have to do is visit the official website of your router at routerlogin.net and download the latest Netgear Router firmware from your home.
Are you experiencing routerlogin.net issue? problem? There’s no issue! Simply ensure that you’re using a current web browser and that you have put in the correct web address with no typos in the web address bar of your browser.
Power Cycle Netgear Router
As we’ve already discussed earlier, if you continually seeing flashing blue LED at the bottom of your Netgear router, then you need to come up with a solution immediately to resolve the issue. Because if you keep seeing blue LEDs on your router from Netgear will affect the performance of the Netgear router.
It is more efficient to turn off your router from Netgear.
Here are the rules to be followed exactly in the in the order given:
Step 1. 1. First disconnect your Netgear router.
Step 2. 2. Give it a few minutes.
Step 3: Plug your Netgear router back in.
Step 4. Step 4: 4. The Netgear router’s light source will begin to blink green. Then wait until it gets stable.
When you notice a an unchanging green LED on your router from Netgear We suggest that you connect on it (router) and then modify the current netgear router login login password.
You could be thinking the two issues are in common is it not? What is the best way to change passwords for the Netgear WiFi router password aid in resolving the issue?
The solution is straightforward! “Netgear router blinking blue” This issue may persist because of high traffic to your Netgear router, or other devices that connect to your router’s wireless network. It is therefore crucial to make the necessary changes. Once you have changed the Netgear WiFi router’s login password, every device that is not allowed to connect will be removed from the network. When they’re disconnected, you will be able to permit only the devices that are connected the router’s SSID that are already known to you. When devices that are known to you have been connected to router’s SSID it will turn unloaded and will give you a cool green light.
Are you thinking about how to sign in to the Netgear router? Do not worry! You can login with your Netgear router by using the routerlogin.net web address or 192.168.1.1 IP (in the event that you encounter routerlogin.net not working error) and then make adjustments to the router according to.
If you follow the suggestions within this post, you’ll surely find a permanent solution for the “Netgear network router blinking blue light” problem.